Off Topic DIY

[DMD]

I generally just turn the chuck by hand with a bit of weight behind it until the bit is through the initial glaze, and then drill as normal. I don't recall ever having a problem.

 

[Mr Hatem]

I generally just turn the chuck by hand with a bit of weight behind it until the bit is through the initial glaze, and then drill as normal. I don't recall ever having a problem.

Is that a pic of you in your avatar, DMD?

 

[DMD]

Is that a pic of you in your avatar, DMD?

Yep. Hurts like **** when he yanks me up by my lugs like that.

 

[Mr Hatem]

Yep. Hurts like **** when he yanks me up by my lugs like that.

OK thanks. I don't actually watch those reality dancng programmes myself.

 

[TheCasual]

I once drilled into a live wire whilst putting a shelf up. It threw me off the ladder.

Now DIY advice...

I had you down as someone who would use tools on a daily basis

 

[Cambstiger]

I generally just turn the chuck by hand with a bit of weight behind it until the bit is through the initial glaze, and then drill as normal. I don't recall ever having a problem.

Or use any blunt instrument - I use a broken screwdriver.

 

[Des Head]

I generally just turn the chuck by hand with a bit of weight behind it until the bit is through the initial glaze, and then drill as normal. I don't recall ever having a problem.

I don't know who "Chuck" is, but he's a lucky guy.

 

[Amin Arrears]

I don't know who "Chuck" is, but he's a lucky guy.

Me

 

[Des Head]

Me

You ****. I spat my beer out and got told off.

 

[Kempton]

I generally just turn the chuck by hand with a bit of weight behind it until the bit is through the initial glaze, and then drill as normal. I don't recall ever having a problem.

I'd do the same. Once you have made a starting place you're good to go.

 

[dennisboothstash]

I generally just turn the chuck by hand with a bit of weight behind it until the bit is through the initial glaze, and then drill as normal. I don't recall ever having a problem.

No one’s interested in your sexual techniques

Focus on the chap’s DIY problems FFS

 

[DMD]

No one’s interested in your sexual techniques

Focus on the chap’s DIY problems FFS

It's true DIY.

 

[Des Head]

I'd do the same. Once you have made a starting place you're good to go.

Always make sure your starting place is somewhere public.

 

[balkan tiger]

Masking tape, center punches or any other way of making your starting point is no ****ing use when the drill bits look like this.

You must log in or register to see images

 

[Kempton]

Always make sure your starting place is somewhere public.

Eh? Yet again, I do believe I'm proper whooshed

 

[Des Head]

Eh? Yet again, I do believe I'm proper whooshed

I can't be the only person thinking that this whole thread is a gay euphemism?

Re-read the thread but replace the word 'drill' with 'cock'.

 

[Kempton]

I can't be the only person thinking that this whole thread is a gay euphemism?

Re-read the thread but replace the word 'drill' with 'cock'.

I can't be 'arsed'...

 

[Mr Hatem]

I can't be the only person thinking that this whole thread is a gay euphemism?

Re-read the thread but replace the word 'drill' with 'cock'.

Homophobe

 

[Mr Hatem]

I don't know who "Chuck" is, but he's a lucky guy.

Me

Bob isn't Chuck, but he is a right Charlie.

 

[balkan tiger]

I can't be the only person thinking that this whole thread is a gay euphemism?

Re-read the thread but replace the word 'drill' with 'cock'.

Just you, anyway despite all the conflicting advise I drilled the holes in the tiles so you can now steer the thread in any way you so desire